Provision ISR IP Series User Manual page 31

Page 26
pre-defined schedule.
Once chosen you will have to set the schedule. The set schedule will be relevant for
all weekdays and cannot be set for each day independently.
3. Press the "Save" button to save the settings.
4.4 Advanced Analytics
This version offers advanced video analytics that was designed to detect special scenarios and
events. In Eye-Sight v2, the Video analytics detection is based on true object detection of 3
classes: Humans, 4 wheel vehicle and 2 wheel vehicle. v5.1 offers a variety of Analytics
based on Object detection (Line Crossing, Sterile Area, Object Counting) together with
advanced face detection and other general analytics such as Camera Tampering
Note that some features might not be available in specific models. For confirmation please
refer to the camera's technical specs.
4.4.1 Camera Tampering
Camera tapering uses special analytics algorithm to detect if the camera was tampered with.
This includes: Camera tampering – detects if the camera was shifted from its original location,
covered or that the lens was tampered with. Color cast detection – detects if the camera image
suffers from unusual color (For example faulty ICR results in pinkish) image.
1.Go to "Advanced Analytics"→ "Camera Tampering" to get to the interface as shown below:
2. Enable the required detection analytics out of Camera Shifting/Lens Tampering/Masking
detection.
3. Set the Alarm response as follows:
Alarm Out
Trigger Snap
Trigger SD Recording
Trigger Email
Trigger FTP
4. Click "Save" to confirm.
IP CAMERA USER MANUAL
Alarm Triggers:
triggers the alarm out relay
takes a snapshot (SD card must be available)
Initiates video recording over the SD card (SD card
must be available)
sends an email as configured in the Email section.
send a snapshot as configured in the FTP section