1. Summary: This document describes the correct installation and operation methods of I5PT-390AHDX4/10 Models. 1.1 Important Safety Notes: Please read this manual carefully before installing and operating the camera. Please refer to the technical specs to confirm you are using a suitable power supply. Do not use power supply with higher/lower rating than specified.
Picture 2-1: Cable Reference 4. Device Installation: The camera is designed for a wall installation only! Please refer to the installation instructions below. Important: The installation surface should be able to hold at least triple the weight of the assembled camera. Step 1: Install the camera’s bracket to the wall: For cement wall: 1.
Step 2: Install the camera: 1) Pass the camera’s cable through the installed bracket. 2) Secure the camera to the bracket using the supplied screws. 3) Make all connections (Connect Power source last) Step 3: Connect the camera to a controller: 1) Connect the camera to a controlling device such as RS-485 keyboard or DVR (By CoC/RS-485).
Page 6
Set #103 preset Record Pattern scan 1 Set #104 preset Record Pattern scan 2 Set #105 preset Record Pattern scan 3 Set #106 preset Record Pattern scan 4 Set #111 preset Set color-to-black function Set 360°scan, the preset-dwell: 0S Set #112 preset Set 360°scan, the preset-dwell: 5S Set #113preset Set 360°scan, the preset-dwell: 10S...
Need help?
Do you have a question about the I5PT-390AHDX4 and is the answer not in the manual?
Questions and answers