Page 18
IP CAMERA USER MANUAL
2. Check "Enable" and then click "Draw" button.
3. Drag the mouse to set the ROI area.
4. Set the level.
5. Click "Save" button to save the settings.
Now, you will see that the selected ROI area is clearer than other areas, especially in low
bit-rate settings.
4.2.6 Zoom/Focus*
The zoom/focus interface is used for setting the lens of the camera (In MVF Models only).
You can also enable "Day/Night Switching focus" which will refocus the lens every time the
camera switched from day to night and vice-versa.
"One Key Focus" will automatically focus the lens in one click.
Zoom +/- will manually control the zoom ratio.
Focus +/- will manually set the focus of the lens.
Need help?
Do you have a question about the IP Series and is the answer not in the manual?