Provision ISR IP Series User Manual page 14

Page 9
The following table will explain the available detail field.
Device name
Product Model
Brand
Software version
Software build date
Kernel version
Hardware version
ONVIF Version
OCX Version
Mac Address
QR Code
4.1.2 Date & Time Configuration
Setting steps:
1. Go to Config→Date & Time menu as shown below.
2. Set the time zone.
3. Enable DST mode if required. DST settings are already configured according to your time
zone. If you wish to set the DST manually, switch to "Manual DST" and set it accordingly.
4. To set the date and time, click on the "Date and Time" tab. You may synchronize the
camera time with an NTP server (Internet connection required), synchronize the camera time
with the time of the computer you are using or set the time manually.
IP CAMERA USER MANUAL
Parameter Meaning
Name of the device – can be modified from
the OSD settings
The model of the device
The brand of the camera
The current software version
The software build-date
The kernel version of the device
The hardware version of the device
The current ONVIF version
The current OCX version
The MAC address of device
QR Code used for P2P connection