Digi AnywhereUSB Plus User Manual page 1008

Command line interface
Parameters
address: 12-digit, colon-delimited MAC address [00:11:22:AA:BB:CC]
config service anywhereusb autoreg
Automatically register or reject computers that have not previously connected to the Hub. See
Automatically register unknown clients
Syntax
config service anywhereusb autoreg [option]
enable (true|false)
Determine whether unknown clients should be registered.
groups (0-23) (group01-24)
List the group numbers to which an unknown client is allowed access.
Examples
Enable autoregistration for the Hub
config service anywhereusb autoreg enable true
Allow access to an unknown client to group 1
This example allows unknown clients to access group 1. For this command to be successful, the
client must have at least one group already assigned.
config service anywhereusb autoreg groups 0 group01
config service anywhereusb clients
Add a client ID to the client list. When a computer searches for Hubs, any computer with a client ID
on the client list can connect to the Hub. You can also add client IDs in the web UI. See
a client ID.
Syntax
config service anywhereusb clients [option]
Options
0-255: Specify the client index.
[id " string" ]: Specify the client ID for the computer.
[description "string]" : Specify a descriptive name for the computer.
groups (0-23) (group01-24): Specify the groups this client ID can access.
Examples
You must be in configuration mode to use these commands.
Show a list of clients
This command shows the client description, the groups assigned to the client, and the client ID for
each client.
AnywhereUSB Plus User Guide
for more information.
Command line reference
Manually add
1008