Inxpect Value Line Instruction Manual page 77

10.2.3 Back up the configuration to a PC
The current configuration can be backed up, including the input/output settings. The configuration is saved in a
.cfg file, which can be used to restore the configuration or to facilitate configuration of several Inxpect Value Line.
1. In Settings > General, click BACKUP.
2. Select the file destination and save.
Note: user login credentials are not saved using this backup mode.
10.2.4 Load a configuration from a PC
1. In Settings > General, click RESTORE.
2. Select the previously saved .cfg file (see "Back up the configuration to a PC" above) and open it.
Note: a re-imported configuration requires new downloading onto the control unit and approval according
to the safety plan.
Note: this SD Restore function also includes a System recondition operation, see "Replace a sensor: System
recondition function" on the previous page.
Inxpect Value Line | Instruction manual v1.0 FEB 2025| Inxpect VL-IM-7_00375_en_v1.0 | © 2025 Inxpect SpA
10. Maintenance
77