System Software - Inxpect Value Line Instruction Manual

12. Appendix
Contents
This section includes the following topics:

12.1 System software

12.2 Disposal
12.3 Service and warranty
12.1 System software
12.1.1 Introduction
The aim of this appendix is to provide and clarify the information related to the system software. It includes the
information necessary for the integrator during the installation and integration.
Considering that Inxpect Value Line is an embedded system provided with a firmware already deployed on board,
no software integration is required by the system installer or by the end user.
12.1.2 Configuration
The system configuration can be performed by means of a PC-based configuration tool, called the Inxpect Safety
application.
The system configuration is described in "Installation and use procedures" on page 53.
12.1.3 Competence
Although no competence is required for software integration, a skilled person is required for system installation
and configuration, as described in "Installation and use procedures" on page 53.
12.1.4 Installation instructions
The firmware is already deployed on the hardware, the PC-based configuration tool includes a self-explanatory
setup installer.
12.1.5 Outstanding anomalies
At the moment of the issue of this document, no software/firmware anomalies or bugs are known.
12.1.6 Backward compatibility
Backward compatibility is guaranteed.
12.1.7 Change control
Any change proposal suggested by the integrator or the end user should be forwarded to Inxpect and evaluated
by the Product Owner.
100 Inxpect Value Line | Instruction manual v1.0 FEB 2025 | Inxpect VL-IM-7_00375_en_v1.0 | © 2025 Inxpect SpA
100
101
101