5-14
Troubleshooting and Repair
Removing the Hard Disk
Follow these steps to remove the hard disk.
1.
Turn off system power.
Unplug the Versa S and any peripheral devices connected to it.
2.
Move the keyboard out of the way following the instructions in "Removing the
3.
Keyboard."
Locate the hard disk.
4.
5.
Locate and remove the screw that secures the protective shield and the hard disk.
Figure Section 5-10 Locating the Hard Disk
CAUTION: Do not use a magnetic screwdriver
when removing the screw. Doing so can erase
the data on the hard disk.
Figure Section 5-11 Removing the Screw
Shield
Hard
Disk
Shield
Screw