Removing The Battery; Removing The Hard Disk Drive - NEC Packard Bell EasyNote M5 Disassembly Manual

Removing the Battery

Perform the following steps to remove the battery:
1. Make sure to power off the unit.
2. Turn the unit upside down.
3. Unlock the battery and slide it out of its place as the arrow shows in Fig. 1

Removing the Hard Disk Drive

To remove the hard disk drive, first remove the battery (see
perform the following steps:
1. Remove the screws as shown in Fig. 2
Fig. 2 Removing the Hard disk drive cover
Fig. 1 Removing the battery
Packard Bell EasyNote M5/M7 Disassembly Manual
Removing the Battery), then
A=M2.5x7 black
B=M2.5x5 black
5