Moving The Keyboard; Locating The Retainer - NEC VERSA S Service Manual

Section 4

Moving the Keyboard

Follow these steps to move the keyboard out of the way before installing memory or re-
placing the hard disk.
Unplug the Versa S system and any peripheral devices connected to it.
1.
Turn off system power.
2.
Open the LCD panel until it lies flat.
3.
Locate the plastic retainer across the top of the keyboard.
4.
5. Find the groove between the
(like the tip of a small screwdriver) under the retainer.
Flip the retainer up to remove it. Put it in a safe place. The keyboard springs up a
ways when the retainer is removed.
NOTE: Do not leave the system in Suspend or
Standby mode when installing internal options.
F7
Figure Section 4-1 Locating the Retainer
and F8 function keys. Insert a thin pointed object
Groove between
F7 and and F8 Keys
Retainer
Retainer