Replacing The Keyboard; Installing The Hard Disk; Positioning The Keyboard - NEC VERSA S Service Manual

4-14 Options
7. Firmly press the drive towards the connectors until the attachment is secure.
Lower the protective shield over the hard disk.
8.
Replace the screw that secures the drive and shield.
9.
10. If there is nothing else to be installed, go to the next section, "Replacing the
Keyboard" to continue with the upgrade.

Replacing the Keyboard

Replace the Versa S keyboard as follows:
1. Turn the keyboard over and align it so it is parallel with the system.
Lower the tabs on the front of the keyboard under the edge of the chassis.
2.
Figure Section 4-10 Installing the Hard Disk
CAUTION: Do not use a magnetic screwdriver
to replace the screw. Doing so can erase the data
on the hard disk.
Keyboard
Figure Section 4-11 Positioning the Keyboard
Hard Disk
Tabs