Removing The Hard Disk Drive - NEC Versa M540/PB EasYnote R7 Disassembly Manual

Removing the Hard Disk Drive

To remove the hard disk drive, first remove the battery (see
perform the following steps:
1. Remove the screws on HDD cover and carefully open up as shown in Fig. 2
2. Unscrew the HDD module and disconnect it as shown in Fig. 3
NEC Versa M540/PB EasyNote R7 Disassembly Manual
Removing the Hard disk drive cover
Fig. 2
1
Disconnecting the hard disk drive
Fig. 3
Removing the Battery), then
2
M2x3.5 Black
M2.5x7 Black
Page 6