Removing The Hard Disk Drive - NEC Versa E3100 Disassembly Manual

Removing the Hard Disk Drive

To remove the hard disk drive, first remove the battery (see Removing the Battery), then
perform the following steps:
1. Remove the screws as shown in Fig. 4
2. Release the screws that secure HDD module as shown in Fig. 5 and carefully pull the
HDD module out from the base unit.
Fig. 4 Removing the Hard disk drive cover
Fig. 5 Screw retaining the HDD module
NEC VERSA E3100 Disassembly Manual
M2.5X4.5 Black
M2.5X6.5 Black
Page 8