Removing the Battery
Perform the following steps to remove the battery:
1. Make sure to power off the Versa M320.
2. Turn the unit upside down.
3. Unlock the battery and slide it out of its place as the arrow shows in Fig. 1
Removing the Hard Disk Drive
To remove the hard disk drive, first remove the battery (see
perform the following steps:
4. Remove the screws as shown in Fig. 2
5. Lift up the hard disk drive and disconnect it as shown in Fig. 3
Fig. 1 Removing the battery
Fig. 2 Removing the Hard disk drive cover screws
NEC Versa M320 Disassembly Manual
Removing the
Battery), then
M2x3 Silver
Page 5