4.
Disconnect the battery cable from the system board and remove the battery.
Figure Section 5-4 Removing the CMOS and Bridge Batteries
Removing the Inverter Circuit Board
Follow these steps to remove the inverter circuit board.
1.
Turn off system power.
2.
Unplug the Versa S and any peripheral devices connected to it.
Remove the following items using the procedures provided earlier in this section:
3.
n
keyboard
n
hard disk
n
system cover and LCD assembly.
Disconnect and remove the inverter circuit board from the system board.
4.
Figure Section 5-5 Removing the Inverter Circuit Board
Bridge
Battery
Inverter Circuit Board
Troubleshooting and Repair
CMOS
Battery
System
Board
5-17