Preferences - NEC VERSA S Service Manual

2-12 Setup and Operation
n
Video Display — Set the video display type. Choose from the following selections
if connecting an external monitor.
VGA – default setting
CGA80 Column
CGA40 Column
Monochrome

Preferences

Options available under the Preferences menu are described next.
n
Quick Boot — Enable/disable the system to bypass the memory test when the
self-test is performed at start-up.
The default setting is disabled.
n
Num Lock — Enable/disable Num Lock mode at system start-up. (The embedded
keypad produces the assigned numbers rather than letters when enabled.) Re-
gardless of this setting, the Num Lock key will enable and disable the Num Lock
mode.
The default setting is disabled.
n
Boot Speed — Set the initial CPU speed. When running on battery power, the
slower speed can extend operating time. Choose from the following selections.
Fast Clock – default setting
Slow Clock
n
Typematic Rate — Set the speed at which a character repeats when a key is
pressed and held. Choose from the following character per second (cps) values.
30 cps
20 cps
15 cps
10 cps – default setting
6 cps
2 cps