Removing the Battery
Perform the following steps to remove the battery:
1. Make sure to power off the Versa P600.
2. Turn the unit upside down.
3. Unlock the battery and slide it out of its place as the arrow shows in Fig. 1
Removing the Hard Disk Drive
To remove the hard disk drive, first remove the battery (see
the following steps:
1. Remove the screws as shown in Fig. 2
Fig. 1 Removing the battery
Fig. 2 Removing the Hard disk drive cover
NEC Versa P600 Disassembly Manual
Removing the
Battery), then perform
M2.5x11 Black
Page 5