Vga; Memory; Power Management; Default Setup - NEC VERSA S Service Manual

2-14 Setup and Operation
n
First Boot — Select the drive that the system first looks for the operating system
at system startup.
Drive A – default setting
PCMCIA Card
Drive C

VGA

VGA submenu option is described next.
n
Display Mode — Select and activate the display mode. To use an external moni-
tor with the Versa S, select "Both."
Both
LCD – default setting
CRT

Memory

Memory setup features enable and disable cache memory.
n
Cache Enable —Enabling this feature can speed up some application processing.
The cache is enabled at the factory.
To disable cache memory, highlight the option and press

Power Management

For details about power management features and settings, see Section 3.

Default Setup

Sets default values for all setup entries. Defaults set for the Standard menu are as follows:
n
Date — 01/01/1993 (default setting)
n
Time — 00:00:00 (default setting)
n
COM Port A — COM1 (3F8h)
n
SurePoint — Enable
n
LPT Port Address — LPT1 (378h)
.
Enter