Removing The Keyboard; Removing The Battery Pack; Locating The Plastic Retainer - NEC VERSA S Service Manual

Hide thumbs Also See for VERSA S:
Table of Contents

Advertisement

5-10
Troubleshooting and Repair
3.
At the bottom of the system, slide the release latch and remove the battery pack.

Removing the Keyboard

Follow these steps to remove the keyboard.
1.
Turn off system power.
2.
Unplug the Versa S and any peripheral devices connected to it.
3.
Open the LCD panel until it lies flat.
Locate the plastic retainer across the top of the keyboard.
4.
Find the groove between the F7 and F8 function keys. Insert a thin pointed object
5.
(like the tip of a small flat-tip screwdriver) under the retainer.
Figure Section 5-3 Locating the Plastic Retainer
Battery
Pack
Figure Section 5-2 Removing the Battery Pack
NOTE: Do not leave the system in Suspend or
Standby mode when installing internal options.
Battery
Release Latch
Groove between
F7 and F8 Keys
Retainer

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versa s sereis

Table of Contents