Setting Up And Using The Software; Using The Setup Utility - NEC VERSA MINIDOCK 6000 Manual

Setting Up and
3
Using the Software
Your NEC MiniDock 6000 ships with a CD-ROM containing an online
user's guide and CardWizard
this section to install the online user's guide on your NEC Versa and load
the appropriate drivers.
NOTE
stall them before docking for the first time. Failure to install the driv-
ers first can result in a system malfunction.

USING THE SETUP UTILITY

The setup utility lets you install the online MiniDock user's guide and the
appropriate PC card drivers for your operating system. Do so as follows:
Make sure the CD-ROM reader is installed in the NEC Versa and that
1.
the NEC Versa is not docked.
Insert the NEC MiniDock Setup Utility CD into the reader and close the
2.
tray.
Proceed as follows:
3.
T
If your system is set to AutoPlay, the setup interface screen appears.
Go to the next step.
T
If your system is not set to AutoPlay or does not have AutoPlay
T
In the run field, type
reader designation) and press
®
PC card drivers. Follow the instructions in
If your system requires the CardWizard drivers, you must in-
in Windows for Workgroups, select Run from the File menu in
Program Manager.
in Windows 95 or Windows NT, select Run from the Start menu.
d:\selrest.exe
(where is your CD-ROM
d
or select OK.
Enter

Setting Up and Using the Software 3-1