Interface Commands - SMC Networks 6724AL2 Management Manual

C L
OMMAND INE
Syntax
show line [console | vty]
• console - Console terminal line.
• vty - Virtual terminal for remote console access.
Default Setting
Shows all lines
Command Mode
Normal Exec, Privileged Exec
Example
To show all lines, enter this command:
Console#show line
Console configuration:
Password threshold: 3 times
Interactive timeout: Disabled
Silent time: Disabled
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Vty configuration:
Password threshold: 3 times
Interactive timeout: 600 sec
Console#

Interface Commands

These commands are used to display or set communication parameters for
an Ethernet port, aggregated link, or VLAN.
Command
interface
description
speed-duplex
3-84
I
NTERFACE
Function
Configures an interface type and enters interface
configuration mode
Adds a description to an interface configuration IC
Configures the speed and duplex operation of a
given interface when autonegotiation is disabled
Mode Page
GC 3-86
3-87
IC 3-88