Sntp Commands - SMC Networks 6724AL2 Management Manual

C L
OMMAND INE
• A secure port has the following restrictions:
- Cannot be connected to a network interconnection device.
- Cannot be a member of a static trunk.
- It can be configured as an LACP trunk port, but the switch does
• A port that is already configured as an LACP or static trunk port cannot
be enabled as a secure port.
Example
This example sets the maximum MAC addresses and enables port security
for port 5.
Console(config)#interface ethernet 1/5
Console(config-if)#port security max-mac-count 10
Console(config-if)#port security
Console(config-if)#
Related Commands
mac-address-table static (3-101)

SNTP Commands

The system clock can be dynamically set by polling a set of specified time
servers (NTP or SNTP).
Command
sntp client
sntp server
sntp poll
show sntp
clock timezone Sets the time zone for the switch's internal clock GC
calendar set
show calendar Displays the current date and time setting
3-54
I
NTERFACE
not allow the LACP trunk to be enabled.
Function
Accepts time from specified time servers
Specifies one or more time servers
Sets the interval at which the client polls for time GC
Shows current SNTP configuration settings
Sets the system date and time
Mode Page
GC 3-55
GC 3-56
3-57
NE, 3-58
PE
3-59
PE 3-60
NE, 3-61
PE