Switchport Gvrp; Show Gvrp Configuration - SMC Networks 6724AL2 Management Manual

switchport gvrp

Use this command to enable GVRP for a port. Use the no form to disable
it.
Syntax
switchport gvrp
no switchport gvrp
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
Console(config)#interface ethernet 1/1
Console(config-if)#switchport gvrp
Console(config-if)#

show gvrp configuration

Use this command to show if GVRP is enabled.
Syntax
show gvrp configuration [interface]
interface
• ethernet unit/port
• port-channel channel-id (Range: 1-6)
Default Setting
Shows both global and interface-specific configuration.
Command Mode
Normal Exec, Privileged Exec
- unit - This is device 1.
- port - Port number.
GVRP B
AND RIDGE
E C
XTENSION OMMANDS
3-139