SMC Networks 6724AL2 Management Manual page 151

Command Usage
• GVRP – GARP VLAN Registration Protocol defines a way for
switches to exchange VLAN information in order to automatically
register VLAN members on interfaces across the network.
• GARP – Group Address Registration Protocol is used by GVRP to
register or deregister client attributes for client services within a
bridged LAN. The default values for the GARP timers are
independent of the media access method or data rate. These values
should not be changed unless you are experiencing difficulties with
GVRP registration/deregistration.
Command Attributes
• PVID – VLAN ID assigned to untagged frames received on the
interface.
(Default: 1)
- If an interface is not a member of VLAN 1 and you assign its PVID
to this VLAN, the interface will automatically be added to VLAN 1
as an untagged member.
For all other VLANs, an interface must first be configured as an
untagged member before you can assign its PVID to that group.
• Acceptable Frame Type – Sets the interface to accept all frame
types, including tagged or untagged frames, or only tagged frames.
When set to receive all frame types, any received frames that are
untagged are assigned to the default VLAN. (Option: All, Tagged;
Default: All)
VLAN C
ONFIGURATION
2-119