System Management Commands - SMC Networks 6724AL2 Management Manual

C L
OMMAND INE

System Management Commands

These commands are used to control system logs, passwords, user names,
browser configuration options, and display or configure a variety of other
system information.
Command
Device Designation Command
hostname
snmp-server
contact
snmp-server
location
User Access Commands
username
enable password
Event Logging Commands
logging on
logging history
logging host
logging facility
logging trap
clear logging
show logging
System Status Commands
show
startup-config
3-26
I
NTERFACE
Function
Specifies the host name for the switch
Sets the system contact string
Sets the system location string
Establishes a user name-based authentication
system at login
Sets a password to control access to various
Privileged Exec levels
Controls logging of error messages
Limits syslog messages saved to switch
memory based on severity
Adds a syslog server host IP address that will
receive logging messages
Sets the facility type for remote logging of
syslog messages
Limits syslog messages saved to a remote
server based on severity
Clears messages from the logging buffer
Displays the state of logging
Displays the contents of the configuration file
(stored in flash memory) that is used to start
up the system
Mode Page
GC 3-28
GC 3-63
GC 3-63
GC 3-28
GC 3-29
GC 3-31
GC 3-31
GC 3-33
GC 3-34
GC 3-35
PE 3-36
PE 3-36
PE 3-38