Snmp-Server Host - SMC Networks 6724AL2 Management Manual

Example
Console(config)#snmp-server location WC-19
Console(config)#
Related Commands
snmp-server contact (3-63)

snmp-server host

Use this command to specify the recipient of a Simple Network
Management Protocol notification operation. Use the no form to remove
the specified host.
Syntax
snmp-server host {host-addr community-string} [version 1 | 2c]
no snmp-server host host-addr
• host-addr - Internet address of the host (the targeted recipient).
(Maximum host addresses: 5 trap destination IP address entries)
• community-string - Password-like community string sent with the
notification operation. Although you can set this string using the
snmp-server host command by itself, we recommend that you
define this string using the snmp-server community command
prior to using the snmp-server host command. (Maximum
length: 32 characters)
• version - Specifies whether to send notifications as SNMP v1 or
SNMP v2c traps.
Default Setting
Host Address: None
SNMP Version: 1
Command Mode
Global Configuration
Command Usage
• If you do not enter an snmp-server host command, no
SNMP C
OMMANDS
3-63