Command
negotiation
capabilities
flowcontrol
clear counters
shutdown
switchport
broadcast
octet-rate
show
interfaces
status
show
interfaces
counters
show
interfaces
switchport
interface
Use this command to configure an interface type and enter interface
configuration mode. Use the no form to remove a trunk.
Syntax
interface interface
no interface port-channel channel-id
interface
• ethernet unit/port
• port-channel channel-id (Range: 1-6)
• vlan vlan-id (Range: 1-4094)
Function
Enables autonegotiation of a given interface
Advertises the capabilities of a given interface for
use in autonegotiation
Enables flow control on a given interface
Clears the statistics on a given interface
Disables an interface
Configures broadcast storm control
Displays status for the specified interface
Displays statistics for the specified interfaces
Displays the administrative and operational status
of an interface
- unit - This is device 1.
- port - Port number.
I
C
NTERFACE
OMMANDS
Mode Page
IC
IC
IC
PE
IC
IC
NE,
PE
NE,
PE
NE,
PE
3-89
3-90
3-91
3-93
3-94
3-94
3-95
3-97
3-98
3-85
Need help?
Do you have a question about the 6724AL2 and is the answer not in the manual?