Radius-Server Host - SMC Networks 6724AL2 Management Manual

• You can specify three authentication methods in a single command to
indicate the authentication sequence. For example, if you enter
"authentication login radius tacacs local," the user name and
password on the RADIUS server is verified first. If the RADIUS server
is not available, then authentication is attempted on the TACACS+
server. If the TACACS+ server is not available, the local user name and
password is checked.
Example
Console(config)#authentication login radius
Console(config)#
Related Commands
username (3-28)

radius-server host

Use this command to specify the RADIUS server. Use the no form to
restore the default.
Syntax
radius-server host host_ip_address
no radius-server host
host_ip_address - IP address of server.
Default Setting
10.1.0.1
Command Mode
Global Configuration
Example
Console(config)#radius-server host 192.168.1.25
Console(config)#
A
UTHENTICATION
C
OMMANDS
3-157