Table of Contents
Advertisement
Command Usage
•
Static multicast addresses are never aged out.
•
When a multicast address is assigned to specific VLAN, the
corresponding traffic can only be forwarded to ports within that
VLAN.
Command Attributes
•
Interface – Activates the Port or Trunk scroll down list.
•
VLAN ID – Selects the VLAN to propagate all multicast traffic coming
from the attached multicast router/switch.
•
Multicast IP – The IP address for a specific multicast service.
•
Port or Trunk – Specifies the interface attached to a multicast router.
Web – Click IGMP Snooping, IGMP Member Port Table. Specify the
interface attached to a multicast service (via an IGMP-enabled switch or
multicast router), indicate the VLAN that will propagate the multicast
service, specify the multicast IP address, and then click Add. After you
have completed adding ports to the member list, click Apply.
M
F
ULTICAST
ILTERING
2-155
Hide quick links:
Advertisement
Table of Contents
