Servotronix CD3E Quick Start Manual page 8

错误!使用"开始"选项卡将 Heading 1 应用于要在此处显示的文字。
The CD3E drive utilizes hazardous voltages. It must be properly grounded.
When connecting the CD3E to other control equipment, be sure to follow two basic guidelines
to prevent damage to the drive:
The CD3E must be grounded via the earth ground of the main AC voltage supply.
⚫
Any motion controller, PLC or PC that is connected to the CD3E must be grounded to the
⚫
same earth ground as the CD3E.
The machine builder and the machine owner are responsible for the safety of the machine
operators.
The machine owner and the machine operator are responsible for ensuring personnel cannot
enter the hazard zone while the machine is energized unless adequate functional safety
mechanisms are in place.
8
CD3E
Quick Start Guide