Servotronix CD3E Quick Start Manual page 2

Revision History
Doc. Rev.
1.0
Copyright Notice
© 2024 Servotronix Motion Control Ltd.
All rights reserved. No part of this work may be reproduced or transmitted in any form or by
any means without prior written permission of Servotronix Motion Control Ltd.
Disclaimer
This product documentation was accurate and reliable at the time of its release. Servotronix
Motion Control Ltd. reserves the right to change the specifications of the product described
in this manual without notice at any time.
Trademarks
CD3E and ServoStudio+ are trademarks of Servotronix Motion Control Ltd.
CANopen and CiA are registered trademarks of the CAN in Automation User's Group.
EtherCAT is a registered trademark of Beckhoff Automation GmbH.
Windows is a registered trademark of Microsoft Corporation.
Contact Information
Servotronix Motion Control Ltd.
21C Yagia Kapayim Street
Petach Tikva 49130, Israel
Tel: +972 (3) 927 3800
Fax: +972 (3) 922 8075
Website: www.servotronix.com
Technical Support
If you need assistance with the installation and configuration of the CD3E drive, contact
Servotronix technical support:
2
Date Remarks
31 July 2024 Initial release
tech.support@servotronix.com
CD3E
Quick Start Guide