Servotronix CD3E Quick Start Manual page 37

CD3E
Figure 7-2. Save changes to axis (saves parameter in drive)
2. Select Save Changes to Axis n.
Save Changes writes the new parameter values to the drive, but does not save the
parameter values to the database or a file.
7.1.3 Copy Parameter Values to Another Motor
To copy parameter values from one motor to another:
1. With modified parameter fields highlighted, select the number of the axis you want to
copy to.
2. Select Save Changes to Axis.
7.1.4 Save Motor Parameters
Save to Database
Export to File
Quick Start Guide
错误!使用"开始"选项卡将 Heading 1 应用于要在此处显示的文字。
Saves motor parameter settings to the database. Does not write
to the drive.
New. When modifying parameter values of a motor in the
⚫
ServoStudio+ motor library, you can save the changes only by
defining a new motor in the User library.
Replace Existing. You can overwrite a file in the User library.
⚫
Prompts you to save motor parameters from ServoStudio+ to a
JSON file.
37