Servotronix CD3E Quick Start Manual page 34

错误!使用"开始"选项卡将 Heading 1 应用于要在此处显示的文字。
Axis color
White
Green
Yellow
Red
Green/Yellow split
3. Open the ServoStudio+ navigation menu.
Figure 7-2. Navigation menu
6.3 Parameter Values
The first time a new drive is connected to ServoStudio+, the software displays the drive's
factory-defined (default) parameter values.
ServoStudio+ reads and displays values from the drive RAM.
After you edit a parameter value, press Enter, or press Tab to move the next field.
⚫
The new value is sent to the drive RAM, and an update message is displayed.
To save parameter values to the drive's non-volatile memory at any time, press the Save
⚫
button on the ServoStudio+ toolbar. If not saved, modified parameter values are lost
upon power cycle.
34
Meaning
Axis disabled
Axis enabled
Axis disabled with a warning
Axis disabled with a fault
Axis enabled, with a warning
CD3E
Quick Start Guide