DiGidot C4 Manual page 41

Hide SSID
Hide or show the Wi-Fi network name.
Channel
Wi-Fi channel can be set between 1 and 14 or you can choose for 'auto'.
Enable DHCP
Enable or disable the DHCP server. When enabled the DiGidot C4 will assign IP Addresses
to devices that connect to the hotspot.
DHCP start IP Address
This is the starting IP Address of the IP Address range that the DiGidot C4 can assign to
other devices in the network.
DHCP end IP Address
This is the last IP Address of the IP Address range that the DiGidot C4 can assign to other
devices in the network.
Enable BSSID
Enable the use of BSSID
Hotspot settings example
IP Address
Subnet-mask
Security Wi-Fi
Wi-Fi password
Wi-Fi name
Wi-Fi channel
Hide SSID
Enable DHCP
DHCP start IP Address
DHCP end IP Address
Enable BSSID
Connect to Wi-Fi
The DiGidot C4 will connect to another Wi-Fi network. If the Wi-Fi network is secured,
you need to enter the network password.
Select a network
This shows a list of available Wi-Fi networks found by the DiGidot C4.
After selecting a network, you will be asked to enter the network password in case it is
protected.
Static IP
Enable the option to fill in a static IP Address. When disabled the DiGidot C4 will use
DHCP to get an IP Address from the network.
IP Address
The (static) Wi-Fi IP Address of the DiGidot C4. Make sure it's in the same IP Address
range as the network you are connecting to.
Subnet-mask
Network broadcast range of your device.
C4 Manual
G d ot
192.168.0.1
255.0.0.0
Secured
123456789
DiGidot C4 Wi-Fi
Auto
Disabled
Enabled
192.168.0.2
192.168.0.30
Disabled
Version 1.0 41