DiGidot C4 Manual page 10

The DiGidot C4 explained
Micro SD
Analog jack
(TRRS)
Side Status Light
Art-Net/DMX controller required
In order for the DiGidot C4 to work in a system setup you will require a third party
Art-Net/DMX software or console. The DiGidot C4 controllers are known to be work-
ing with various professional grade softwares and consoles, such as: MADRIX, Pharos,
ArKaos, Resolume, MadMapper, POET, grandMA and many more. Als long the control
software or console uses industry standard Art-Net or DMX protocols, you can con-
trol the DiGidot C4 controller.
Control software, DMX & Art-Net control platforms
When the setup process has been completed, the DiGidot C4 is ready to be used
with any type of Art-Net/DMX software/device.
The DiGidot C4 can automatically be detected as an Art-Net device, depending on
the software or console.
Each DiGidot C4 has an unique IP address for unicasting. You assign a device name to
it for easier recognition (see the chapter Configuring the DiGidot C4).
The DiGidot C4 has been tested to work with following control softwares and con-
soles:
Madrix Lighting Control
Resulume
MadMapper
Pharos
GrandMA
Supported ICs
For the various 'Data' and 'Clock+Data' SPI protocols, following LED Driver ICs are
supported:
APA102, APA102_8bit,APA104, APA106, BS0901, DM412, GW6205_400, GW6205_800,
INK1003, LD1510, LPD6803, MBI6024, MY9221, MY9231, PC5XS301v0500, SK6812,
SK6812RGBW, SM16703, SM16716, SM16726, TM1803, TM1804_400, TM1804_800,
TM1809, TM1812, TM1814, TM1914a, UCS1903_400, UCS1903_800, UCS1904, UCS2903,
UCS2904,UCS2912, UCS512B3, UCS8904, UCS9812, WES9412, WES943, WS2801,
WS2803, WS2811_400, WS2811_800, WS2812, WS2812s, WS2812b, WS2813, WS2818
For an up to date overview of supported ICs visit www.digidot.eu.
C4 Manual
G d ot
Power Port
Ethernet Ports
Version 1.0
Top Status Light
Input/Output Port
Button
10