DiGidot C4 Manual page 14

BEFORE INSTALLATION
2
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget
dolor. Aenean massa. Cum sociis natoque penatibus et magnis ridiculus.(uitleg).
Safety instructions
Before installation and use of this product, read this manual carefully.
Make sure that these instructions are handed over to the end-user and those
responsible for installation and usage.
Local electrical and safety rules and guidelines always always overrule this manual.
DiGidot Technologies B.V. cannot be held liable for improper handling, product
installation, usage or storage.
Installation should only be carried out by a professional and certified installer that is
qualified to work on the electric installation.
Do not conduct any repairs of the device (there are no user serviceable parts inside).
Any unapproved repairs and/or product modifications will void product warranty.
DiGidot Technologies B.V. cannot be held liable for any consequences.
Repairs of this product may only be carried out by the manufacturer DiGidot
Technologies B.V.
Repairs and maintenance on the installation may only be carried out by qualified
technicians.
Always disconnect the mains power when working on a high voltage electric
installation, not doing so may result in product damage or personal injuries.
Do not connect or modify this product other than described in this manual.
Never use a product that is damaged or does not work correctly or when the product
is visibly damaged or when the product starts to smoke, or when a crackling/sizzling
noise is audible. If this is the case in any way, please contact your supplier
immediately.
The DiGidot C4 is a low voltage device. Working voltage is 5-24 Vdc only.
Never connect more than one power source to the DiGidot C4 (USB OR external PSU).
Never use the USB power connector when also powering with an external power
source. This will damage your DiGidot C4 and/or the USB device.
The DiGidot C4 is not POE ready (Power Over Ethernet)! Applying POE will cause fatal
damage to the DiGidot C4. Make sure that POE is turned off in your access point,
router or network switch settings, before connecting the DiGidot C4 to your network.
The only way to completely power off your device is to disconnect it from the power
source.
The DiGidot C4 is designed for indoor use (dry locations) only. Exposure to rain or
moisture may cause damage to the controller and increase risk of electrical shock.
C4 Manual
G d ot
Version 1.0 14