DiGidot C4 Manual page 29

4. Enable Wi-Fi on your mobile device and go to Wi-Fi settings in your mobile device
and connect to the DiGidot C4 network.
5. Start the DiGidot C4 app to access the DiGidot C4.
Device network settings for Art-Net
The device network settings can be changed in the integrated user interface. This is
required in case you want communicate with an Art-Net control device.
1. Log into user interface
The DiGidot C4 has a web-based user interface which you can access by using a web
browser. Once you have configured the IP settings on your computer, you can access
the DiGidot C4 interface. Open your web browser, type 10.254.254.254 in the address
bar and press enter.
2. Configure device name and network settings
Home Settings
You can change the device name optionally. Then change the IP Address and subnet
mask of the DiGidot C4. The IP Address needs to be unique in your network to avoid IP
conflicts.
Network Settings Example Settings
Device name (maximum 18 characters):
IP Address:
Subnet-mask:
NOTE: These settings are just an example in order to get the DiGidot C4 to work.
Alternatively the DiGidot C4 can be integrated in an existing network (be sure to change
your DiGidot C4 network settings to match your local network).
For questions about network integration, consult a local IT or network specialist.
3.
Wi-Fi settings (optional)
Home Settings
Before configuring the internal Wi-Fi of the DiGidot C4, note that sending Art-Net over
Wi-Fi is strongly discouraged, because of instability, unreliability and speed of wireless
networks Wi-Fi is intended for configuring the DiGidot C4 and playback triggering.
C4 Manual
G d ot
Network.
Network settings set Wi-Fi mode to 'Hotspot' or 'Connect to Wi-Fi'
Version 1.0
My DiGidot C4
10.0.0.2
255.0.0.0
29