DiGidot C4 Manual page 27

CONFIGURATION
4
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget
dolor. Aenean massa. Cum sociis natoque penatibus et magnis ridiculus.(uitleg).
Accessing the DiGidot C4
You can connect to the DiGidot C4 with a wired Ethernet connection or by Wi-Fi.
The DiGidot app is available for mobile devices in the App Store and Google Play.
In case an account has been created to access the DiGidot C4, the same username and
password have to be used in the app.
Configuring computer for built in web interface with
wired connection
To setup a wired computer connection, power up the DiGidot C4 and use a CAT5 RJ45
network cable to connect your DiGidot C4 to a computer.
Plug the network cable in one of the RJ45 network ports of the DiGidot C4 and into the
computers Ethernet/UTP port.
In order to connect to the DiGidot C4, it's required to re-configure your computer's LAN
settings first.
NOTE: Please note that changing your Ethernet settings can prevent you from reaching
the Internet and/or other devices in your network. To stay connected to the Internet and
use the online update and upgrade functions, it might be necessary to use a computer
with multiple network connections (LAN or Wi-Fi).
It's recommended to write down what your current network configuration is in order to
restore these settings after you finished the configuration process if necessary.
On Windows computers go to:
Control Panel
Internet Protocol Version 4 (TCP/IPv4)
C4 Manual
G d ot
Network and Internet Network and Sharing Centre
Use the following network settings:
Version 1.0
Ethernet Properties
27