DiGidot C4 Manual page 11

Key features explained
The DiGidot C4 has many powerful features, in this chapter we will explain what these
key features do.
More than 50 supported protocols
The DiGidot C4 supports more than 50 control protocols.
Up to 12 universes Art-Net to SPI conversion*
Depending on your DiGidot C4 version and licence, you can output up to 12 universes,
equaling 6144 control channels.
Art-Net In/Out
The onboard 100Mbit switch allows for an Art-Net input and output.
DMX In/Out
The four I/O ports can be configured as one or two DMX inputs or outputs. It's also
possible to use one input and one output.
The I/O ports can also be configured as 4x DMX TTL which can be converted to four
balanced DMX outputs when a DiGidot Tx Transmitter module is connected to the DiGi-
dot C4.
Art-Net IP address filter
With this feature you can configure the DiGidot C4 to only listen to a specific IP Ad-
dress as input. Signals from other IP Addresses will be ignored.
Art-Net routing
You can route any of the incoming Art-Net universes to the DMX or Art-Net outputs.
HTP merge signal inputs
It is possible to merge various input signals such as DMX and/or Art-Net according to
the HTP (Highest Takes Precedence) principal.
DMX RDM
DMX RDM can be used for remote configuring and addressing other DiGidot products or
DMX RDM compatible devices in the network. This feature is prepared to receive future
sensory data.
Art-Net & DMX Monitor
The Monitor is a powerful tool where all incoming and outgoing data as well as frame
rate and network status can be monitored.
Art-Net & DMX Monitor
The Monitor is a powerful tool where all incoming and outgoing data as well as frame
rate and network status can be monitored.
Repeat input/output channels
Create simple chase effects for large amount of pixels by simply copying a specific
amount of input channels after each other.
C4 Manual Version 1.0 11
G d ot