This chapter describes some commands which you can perform in the User and Enable modes.
32.1 Overview
The following command examples show how you can use User and Enable modes to diagnose
and manage your switch.
32.2 show Commands
These are the commonly used
32.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
sysname# show system-info
System Name
System Contact
System Location
Ethernet Address
ZyNOS F/W Version
RomRasSize
System up Time
Bootbase Version
ZyNOS CODE
Product Model
Chapter 32 User and Enable Mode Commands
C
User and Enable Mode
commands.
show
: ES-2048
:
:
: 00:13:49:ae:fb:59
: V3.70(AID.0)b1 | 7/10/2006
: 2467078
:
0:05:09 (7904 ticks)
: V0.6 | 03/06/2006
: RAS Jul 10 2006 08:40:31
: ES-2048
ES-2048 User's Guide
H A P T E R
Commands
3 2
241