Settings For The Entire Unit; Accessing The Menu Screen; Editing The Scene Settings (Scene Edit); Editing The I-Arpeggio Settings (Arpeggio Edit) - Roland JUPITER-X Reference Manual

Settings for the Entire Unit

Accessing the MENU Screen

1 .
Press the [MENU] button .
2 .
Use the [1] knob to select the item that you want to
edit, and press the [ENTER]
You can also make this selection by using the
buttons instead of the [1]
3 .
Use the [1] knob to select the parameter and use the
[2] knob to change the setting .
Editing the Scene Settings
1 .
Press the [MENU] button .
2 .
Use the [1] knob to select
press the [ENTER] button .
The SCENE COMMON EDIT screen appears.
This is the same screen as when you press the
once from the SCENE/MODEL BANK top screen.
To edit other scene settings, press the
times.
3 .
Use the [1] knob to select the parameter and use the
[2] knob to change the setting .
Editing the I-ARPEGGIO Settings
1 .
Press the [MENU] button .
2 .
Use the [1] knob to select
press the [ENTER] button .
The ARPEGGIO PART EDIT screen appears.
This is the same screen as when you press the
twice from the SCENE/MODEL BANK top screen.
Use the [PART] button to select the part whose arpeggio
parameters you want to edit, and then edit the parameters.
If you want to edit the ARPEGGIO COMMON EDIT settings, press
the PAGE [>] button once.
3 .
Use the [1] knob to select the parameter and use the
[2] knob to change the setting .
42
button .
PAGE [ ] [ ]
knob.
(SCENE EDIT)
"SCENE EDIT," and then
PAGE [>] button
PAGE [>] button
(ARPEGGIO EDIT)
"ARPEGGIO EDIT," and then
PAGE [<] button
Editing the Tone Settings
1 .
Press the
2 .
Use the [1] knob
the [ENTER]
The TONE COMMON EDIT screen appears.
This is the same screen as when you press the
nine times from the SCENE/MODEL BANK top screen.
To edit other tone settings, press the
times.
3 .
Use the [1] knob
[2] knob to change the setting .
Using Convenient Functions
Execute convenient functions.
&
"Convenient Functions
Viewing the Software Version
several
View the software version.

Accessing the WRITE Screen

1 .
Press the
button .
2 .
Use the [1] knob
edit, and press the
Saving a Scene
Here's how to save the scene settings. If saving is needed, the screen
indicates "EDITED. "
If the PART 1–4 tones are indicated as
the complete sound, save the tones first.
1 .
Press the
button .
2 .
Use the [1] knob
[ENTER] button .
3 .
Use the [2] knob
then press the
If you want to rename the scene that you're saving, use the
PAGE [<] [>] buttons
specify the character.
4 .
Press the
A confirmation message appears.
If you decide to cancel, press the
5 .
To execute, press the
(TONE EDIT)
[MENU] button .
to select "TONE EDIT,"
button .
PAGE [>] button
to select the parameter and use the
"
(UTILITY Screen)
[SCENE] button, and then press the
to select the item that you want to
[ENTER] button .
(SCENE)
"EDITED, "
[SCENE] button, and then press the
to select "SCENE,"
to select the save-destination, and
[ENTER] button .
to move the cursor, and use the
[ENTER] button .
[EXIT]
[ENTER] button .
and then press
PAGE [>] button
several
(UTILITY)
(p. 48)
(INFORMATION)
[WRITE]
and you want to save
[WRITE]
and then press the
[2] knob to
button.