Maintaining Your Ls3000; Cleaning The Paper Feed Roller (Input Tray) - Ricoh LS3000 Operating Instructions Manual

Remarks

Maintaining Your LS3000

❖ ❖ ❖ ❖ Cleaning the LS3000
Wipe the LS3000 with a soft, damp
cloth, and then wipe it with a dry
cloth to remove any moisture.
Important
❒ Do not use chemical cleaners or or-
ganic solvents such as thinner or
benzene. If such substances get in-
side the LS3000 or deform plastic
parts, a failure may occur.
4
❒ Do not clean parts other than those
explicitly specified in this manual.
Other parts should only be cleaned
by your service representative.
Cleaning the Paper Feed
Roller (Input Tray)
A A A A
Wipe dust off the paper feed roll-
er with a damp cloth, and then
wipe it with a dry cloth.
Note
❒ Keep the paper feed roller clean
to avoid paper misfeeds.
30
ABQ032S