Pci Expansion Cards (Optional) - HP xw4100 Service And Technical Reference Manual

removal and replacement procedures

4.3.18 PCI expansion cards (optional)

To remove an optional PCI expansion card:
1. Lift the PCI levers 1 by first pressing down on them and then out.
2. Lift the PCI expansion card 2 and remove it from the system.
To install an optional PCI expansion card:
1. Lift the PCI levers 1 by first pressing down on them and then out.
2. Remove the PCI slot cover 2 as shown in the following illustration.
3. Install the PCI expansion card 3. Verify that the keyed components of the card align with the
PCI socket.
4. Close the PCI levers 4 as shown.
4–20 hp workstation xw4100 service and technical reference guide