Chassis Feet; Ieee-1394 (Optional) - HP xw4100 Service And Technical Reference Manual

4.3.6 chassis feet

The hp workstation xw4100 ships in a minitower configuration and chassis feet are installed on
the base of the workstation. The unit ships with additional feet should you convert the unit to a
desktop. To install the chassis feet on a desktop-oriented workstation:
1. Situate the unit into the appropriate position as shown in the following illustration.
2. Place the feet into the embossed areas of the unit.

4.3.7 IEEE-1394 (optional)

To install an optional IEEE-1394 adapter:
1. Install the IEEE-1394 card 1 into the PCI socket.
2. Close the PCI levers 2.
3. Connect the power cable 3 into the card.
4. Connect the IEEE-1394 cable adapter 4 to the card.
5. Connect the front IEEE-1394 pre-installed cable 5 to the adapter cable as illustrated in the
following figure.
hp workstation xw4100 service and technical reference guide
removal and replacement procedures
4–11