HP xw4100 Service And Technical Reference Manual page 48

system management
locking the solenoid hood cover lock
To activate and lock the solenoid hood cover lock, complete the following steps:
1. Turn on or restart the workstation.
2. When the
key. Press
If you do not press the
NOTE:
workstation to access the utility.
3. Select Security, then select hood cover and the Locked option.
4. Before exiting, click File > Save Changes and Exit.
unlocking the solenoid hood cover lock
1. Turn on or restart the workstation.
2. When the
key. Press
If you do not press the
NOTE:
workstation to access the utility.
3. Select Security > hood cover > Unlocked.
4. Before exiting, click File > Save Changes and Exit.
using the hood cover FailSafe key
If you enable the solenoid hood cover lock and cannot enter your password to disable the lock,
you will need a hood cover FailSafe Key to open the workstation hood cover. You will need the
key in any of the following circumstances:
Power outage
Startup failure
PC component failure (such as processor or power supply)
Forgotten password
Ä
CAUTION: The hood cover FailSafe Key is a specialized tool available from HP. Be prepared; order this
key before you need one.
To obtain the FailSafe Key, do any one of the following:
Contact your authorized HP reseller or service provider.
Refer to the HP Web site (
Call the appropriate number listed in the warranty.
3–28
message appears in the lower-right corner of the screen, press the
F10=Setup
Enter
to bypass the title screen, if necessary.
F10
key while the message is displayed, you must restart the
message appears in the lower-right corner of the screen, press the
F10=Setup
Enter
to bypass the title screen, if necessary.
F10
key while the message is displayed, you must restart the
www.hp.com
) for ordering information.
hp workstation xw4100 service and technical reference guide
F10
F10