Expansion Cards - HP 280 G2 Maintenance And Service Manual

Expansion cards

Description
AMD R5 320, 1 GB GDDR3, PCIe x16
nVIDIA GT730, 2 GB DDR3, PCIex8
nVIDIA GT720, 2 GB DDR3, PCIex8
Intel PRO/1000 Single Port GbE (network adapter)(HP 280 G2 models only)
Printer port
Serial port
WLAN module, 802.11 a/b/g/n, 2x2, with Bluetooth 4.0
WLAN module caddy card + Bluetooth
HP 280 G2 models have one PCI expansion socket (select models only), one PCI Express x1 expansion socket,
and one PCI Express x16 expansion socket.
HP 285 G2 models have one PCI expansion socket, one PCI Express x1 expansion socket, and one PCI Express
x16 expansion socket.
NOTE: You can install a PCI Express x1, x8, or x16 expansion card in the PCI Express x16 socket.
To remove, replace, or add an expansion card:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Release the slot cover retention latch that secures the slot covers by removing the Torx screw (1), sliding
the latch up (2), and pulling the latch away from the computer (3).
4. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot
on the back of the computer chassis.
(Preparation for disassembly on page
(Access panel on page 18)
17)
Expansion cards 25