HP xw4100 Service And Technical Reference Manual page 102

system diagnostics and troubleshooting
solving diskette problems (continued)
problem
Cannot format diskette.
A problem has occurred
with a disk transaction.
Diskette drive cannot read
a diskette.
"Invalid system disk"
message is displayed.
Cannot Boot to Diskette.
5–24
cause
Invalid media reported.
The directory structure
is bad, or there is a
problem with a file.
Diskette is not formatted.
You are using the wrong
diskette type for the drive
type.
You are reading the
wrong drive.
Diskette is damaged.
A diskette that does not
contain the system files
needed to start the
workstation has been
inserted in the drive.
Diskette error has
occurred.
Diskette is not bootable.
Diskette boot has been
disabled in Computer
Setup.
Removable media boot
has been disabled in
Computer Setup.
Diskette MBR validation
is enabled.
hp workstation xw4100 service and technical reference guide
solution
When formatting a disk in MS-DOS,
you may need to specify diskette
capacity. For example, to format a
1.44-MB diskette, type the following
command at the MS-DOS prompt:
FORMAT A: /F:1440
In Windows 2000 and Windows XP,
right-click Start, click Explore,
and select a drive. Select File >
Properties > Tools. Under
Error-checking, click Check Now.
Format the diskette.
Check the type of drive that you
are using and use the correct diskette
type.
Check the drive letter in the path
statement.
Replace the diskette with a new one.
When drive activity stops, remove the
diskette and press the Spacebar.
The workstation should start up.
Restart the workstation by pressing
the power button.
Replace with a bootable diskette.
Run Computer Setup and enable
diskette boot in Storage > Boot
Order.
Run Computer Setup and enable
Removable Media Boot in Storage >
Storage Options.
Run Computer Setup and disable
Diskette MBR Validation in Storage >
Storage Options.