Service Tag; Computer Feet - HP ENVY m4 Maintenance And Service Manual

Service tag

When ordering parts or requesting information, provide the computer serial number and model
number provided on the service tag. It is necessary to remove the battery to obtain these numbers.
See Battery for battery removal instructions.
Item Component
(1) Product name
(2) Serial number (s/n)
(3) Part number/Product number (p/n)
(4) Warranty period
(5) Model description

Computer feet

The computer includes 4 rubber feet that attach to the base enclosure in the locations
illustrated below. The front rubber feet (1) are heat-staked to the base enclosure. The 2 rear rubber
This manual downloaded from http://www.manualowl.com
Description
This is the product name affixed to the front of
the computer.
This is an alphanumeric identifier that is unique to
each product.
This number provides specific information about the
product's hardware components. The part number helps
a service technician determine what components and
parts are needed.
This number describes the duration of the warranty
period for the computer.
This is the alphanumeric identifier used to locate
documents, drivers, and support for the computer.
Component replacement procedures 29