Show Platform Mac-Address-Table - Cisco WS-C2350-48TD-S Command Reference Manual

Appendix C Catalyst 2350 Show Platform Commands

show platform mac-address-table

Use the show platform mac-address-table privileged EXEC command to display platform-dependent
MAC address table information.
Syntax Description aging-array
hash-table
mac-address mac-address
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(46)EY
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-19055-01
show platform mac-address-table [aging-array | hash-table | mac-address mac-address | retry-q
[mac-address mac-address | vlan vlan-id]] [ | {begin | exclude | include} expression]
(Optional) Display the MAC address table aging array.
(Optional) Display the MAC address table hash table.
(Optional) Display the MAC address table MAC address information,
where mac-address is the 48-bit hardware address.
(Optional) Display information for the specified VLAN. The range is 1
to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
show platform mac-address-table
Catalyst 2350 Switch Command Reference
C-11