Cisco WS-C2350-48TD-S Command Reference Manual page 500

vlan (global configuration)
Table 2-26
Media Type
FDDI-NET
Token Ring
Token Ring
concentrator
relay function
(TrCRF)
Token Ring-NET VTP v1 mode is enabled.
Token Ring
bridge relay
function (TrBRF)
Table 2-27
Table 2-27
Configuration
VTP v2 mode is enabled, and you
are configuring a TrCRF VLAN
media type.
VTP v2 mode is enabled, and you
are configuring VLANs other than
TrCRF media type.
VTP v2 mode is enabled, and you
are configuring a TrBRF VLAN
media type.
Catalyst 2350 Switch Command Reference
2-476
Valid Commands and Syntax for Different Media Types (continued)
Valid Syntax
name vlan-name, media fd-net, state {suspend | active}, said said-value, mtu
mtu-size, bridge bridge-number, stp type {ieee | ibm | auto}, tb-vlan1 tb-vlan1-id,
tb-vlan2 tb-vlan2-id
If VTP v2 mode is disabled, do not set the stp type to auto.
VTP v1 mode is enabled.
name vlan-name, media tokenring, state {suspend | active}, said said-value,
mtu mtu-size, ring ring-number, parent parent-vlan-id, tb-vlan1 tb-vlan1-id,
tb-vlan2 tb-vlan2-id
VTP v2 mode is enabled.
name vlan-name, media tokenring, state {suspend | active}, said said-value,
mtu mtu-size, ring ring-number, parent parent-vlan-id, bridge type {srb | srt},
are are-number, ste ste-number, backupcrf {enable | disable},
tb-vlan1 tb-vlan1-id, tb-vlan2 tb-vlan2-id
name vlan-name, media tr-net, state {suspend | active}, said said-value,
mtu mtu-size, bridge bridge-number, stp type {ieee | ibm}, tb-vlan1 tb-vlan1-id,
tb-vlan2 tb-vlan2-id
VTP v2 mode is enabled.
name vlan-name, media tr-net, state {suspend | active}, said said-value,
mtu mtu-size, bridge bridge-number, stp type {ieee | ibm | auto},
tb-vlan1 tb-vlan1-id, tb-vlan2 tb-vlan2-id
describes the rules for configuring VLANs.
VLAN Configuration Rules
Rule
Specify a parent VLAN ID of a TrBRF that already exists in the
database.
Specify a ring number. Do not leave this field blank.
Specify unique ring numbers when TrCRF VLANs have the same
parent VLAN ID. Only one backup concentrator relay function
(CRF) can be enabled.
Do not specify a backup CRF.
Specify a bridge number. Do not leave this field blank.
Chapter 2 Catalyst 2350 Cisco IOS Commands
OL-19055-01